Remanufactured Refrigerator Compressors and Overhauls

 A compressor is the heart of the refrigeration system and is the part of the system that pumps the refrigerant. The compressor maintains adequate pressure to cause refrigerant to flow in sufficient quantities in order to meet the cooling requirements of the system.

On larger systems the compressors are much bigger and are very expensive to replace.

ICE can offer a remanufactured compressors service where the whole of the compressor is overhauled and any faulty or worn components are replaced.

The client will receive a full report indicating what the problem is/was and which components need to be replaced.

In some cases the overhaul can be done onsite or we can offer a full dismantle/removal service followed by an installation/commission service when the compressor has been repaired.

 

 The Process

  1. Each compressor is removed then drained of oil before being completely dismantled.
  2. All components are examined for wear, when possible existing components that pass specific testing can be re used, with damaged components are replaced for new. Suction and discharge valve reeds and piston rings are replaced regardless of their condition.
  3. Electrical windings are tested and rewound if required.
  4. Components are then put through a cleaning process.
  5. The Remanufactured Compressor is then reassembled and sprayed with a new coat of paint to look like new.
  6. Compressor is then returned to site and re installed and re commissioned by one of our expert technicians.

 

Every compressor that undergoes the re-manufacturing service will be issued with a 12 month warranty.

Contact ICE today by calling 01928 568800 or email.